diff --git a/README.md b/README.md
index 577f1e4..b1ec0ac 100644
--- a/README.md
+++ b/README.md
@@ -9,7 +9,7 @@ A full set of configuration files managed via NixOS. This project is an **unoffi
 
 ### Note on secrets management
 
-Secrets are stored in a separate repo called `nix-secrets`, which is included here as a flake input. This is a poor man's secret management solution, but y'know what, it works. These "secrets" will be readable to users on the system with access to the `/nix/store/`, but for single-user systems, it's fine.
+Secrets are stored in a separate repo called `secrets`, which is included here as a flake input. This is a poor man's secret management solution, but y'know what, it works. These "secrets" will be readable to users on the system with access to the `/nix/store/`, but for single-user systems, it's fine.
 
 Initialize the submodule with:
 
@@ -19,7 +19,7 @@ git submodule update --init --recursive
 
 ### First-time installation
 
-When installing on a brand new system, use `bin/format-drives.sh` to format the main drive with an unencrypted boot partition and a LUKS-encrypted BTRFS partition. This also creates a `hardware-configuration.nix` file.
+When installing on a brand new system, partition the main drive into two partitions: a `/boot` partition, and a LUKS partition. Then, run `bin/format-drives.sh --root [root partition] --luks [luks partition]`. This also creates a `hardware-configuration.nix` file.
 
 ```sh
 ./bin/format-drives.sh --boot /dev/nvme0n1p1 --luks /dev/nvme0n1p2 
@@ -29,15 +29,12 @@ Next, set up the host's config under in the `hosts` folder by copying `configura
 
 Then, add the host to `flake.nix` under the `nixosConfigurations` section.
 
-Finally, run `nixos-rebuild`, replacing `host` with the name of the host:
+Finally, run the NixOS installer, replacing `host` with your actual hostname:
 
 ```sh
-nix flake update
-sudo nixos-rebuild boot --flake .#host
+nixos-install --verbose --root /mnt --flake .#host --no-root-password
 ``` 
 
-`nix flake update` updates the `flake.lock` file, which pins repositories to specific versions. Nix will then pull down any derivations it needs to meet the version.
-
 > [!TIP]
 > This config installs a [Nix wrapper called nh](https://github.com/viperML/nh). Basic install/upgrade commands can be run using `nh`, but more advanced stuff should use `nixos-rebuild`.
 
@@ -49,17 +46,17 @@ Automatic updates work by `git pull`ing the latest version of the repo from Forg
 
 #### Manually updating
 
-Run `nh` to update the system. Use the `--update` flag to update `flake.lock` as part of the process. After the first build, you can omit the hostname:
+Run `nh` to update the system. Use the `--update` flag to update `flake.lock` as part of the process. After the first build, you can omit the hostname and path to your flake.nix file:
 
 ```sh
-nh os boot --update
+nh os switch --update
 ```
 
 This is the equivalent of running:
 
 ```sh 
 nix flake update
-sudo nixos-rebuild boot --flake .
+sudo nixos-rebuild switch --flake .
 ```
 
 There are a few different actions for handling the update:
@@ -88,6 +85,12 @@ nix.distributedBuilds = true;
 
 For hosts where `nix.distributedBuilds` is true, this repo automatically gives the local root user SSH access to an unprivileged user on the build systems. This is configured in `nix-secrets`, but the build systems are defined in [`modules/system/nix.nix`](https://code.8bitbuddhism.com/aires/nix-configuration/src/commit/433821ef0c46f08855a041c3aa97143a954564f5/modules/system/nix.nix#L57).
 
+If you want to ensure a build happens on a remote system, you can use:
+
+```sh
+nixos-rebuild build --flake . --build-host [remote hostname]
+```
+
 ##### Pushing a build to a remote system
 
 Conversely, you can run a build on the local host, then push it to a remote system.
diff --git a/bin/format-drives.sh b/bin/format-drives.sh
index 00daa2c..f1fc93f 100755
--- a/bin/format-drives.sh
+++ b/bin/format-drives.sh
@@ -1,5 +1,7 @@
 #!/usr/bin/env bash
 # Script to setup a drive for a brand new NixOS installation.
+# IMPORTANT: Before running this script, you'll need to create a LUKS partition using:
+#	cryptsetup --label=nixos-crypt --type=luks2 luksFormat [partition]
 
 set -e
 
@@ -55,7 +57,6 @@ done
 
 set -- "${POSITIONAL_ARGS[@]}" # restore positional parameters
 
-cryptsetup --label=nixos-crypt --type=luks2 luksFormat $luks_partition
 cryptsetup luksOpen $luks_partition nixos-crypt
 mkfs.btrfs -L nixos $root_partition
 mount /dev/mapper/nixos-crypt /mnt
diff --git a/modules/apps/office.nix b/modules/apps/office.nix
index 5a3ba3c..d941b48 100644
--- a/modules/apps/office.nix
+++ b/modules/apps/office.nix
@@ -13,16 +13,8 @@ in
       enable = true;
       packages = [
         "org.onlyoffice.desktopeditors"
-        #"us.zoom.Zoom"
+        "us.zoom.Zoom"
       ];
     };
-
-    # Downgrade Zoom due to https://github.com/flathub/us.zoom.Zoom/issues/471
-    services.flatpak.packages = [
-      {
-        appId = "us.zoom.Zoom";
-        commit = "b9505f108b5f9acb2bbad83ac66f97b42bc6a75b9c28ed7b75dec1040e013305";
-      }
-    ];
   };
 }