Gnome: move packages out of Gnome scope per https://github.com/NixOS/nixpkgs/pull/319659

flake.lock

@@ -138,11 +138,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1720135141,
-        "narHash": "sha256-1GHh1/WO+f42TXxb1WiZFMuepM7ITA9iT+6yJBbBNsY=",
+        "lastModified": 1720167120,
+        "narHash": "sha256-K9JYdlPiyaXp33JRg7CT8rMwH56e4ncXSsXW/YKnNXc=",
         "owner": "nix-community",
         "repo": "home-manager",
-        "rev": "c514e862cd5705e51edb6fe8d01146fdeec661f2",
+        "rev": "bbe6e94737289c8cb92d4d8f9199fbfe4f11c0ba",
         "type": "github"
       },
       "original": {

hosts/Dimaga/hardware-configuration.nix

@@ -9,7 +9,6 @@
 let
   bootUUID = "FC20-D155"; # The UUID of the boot partition.
   luksUUID = "9fdc521b-a037-4070-af47-f54da03675e4"; # The UUID of the locked LUKS partition.
-  rootUUID = "dfb4fc8f-e82b-43a1-91c1-a77acb6337cb"; # The UUID of the unlocked filesystem partition.
 in
 {
   imports = [ (modulesPath + "/installer/scan/not-detected.nix") ];
@@ -37,22 +36,16 @@ in
 
   # Configure the main filesystem.
   aux.system.filesystem = {
-    btrfs = {
     enable = true;
-      devices = {
+    partitions = {
       boot = "/dev/disk/by-uuid/${bootUUID}";
-        btrfs = "/dev/disk/by-uuid/${rootUUID}";
+      luks = "/dev/disk/by-uuid/${luksUUID}";
     };
     swapFile = {
       enable = true;
       size = 16384;
     };
   };
-    luks = {
-      enable = true;
-      uuid = luksUUID;
-    };
-  };
 
   # Enables DHCP on each ethernet and wireless interface. In case of scripted networking
   # (the default) this is the recommended approach. When using systemd-networkd it's

hosts/Khanda/hardware-configuration.nix

@@ -9,7 +9,6 @@
 let
   bootUUID = "B2D7-96C3"; # The UUID of the boot partition.
   luksUUID = "f5ff391a-f2ef-4ac3-9ce8-9f5ed950b212"; # The UUID of the locked LUKS partition.
-  rootUUID = "fed155a3-04ae-47c0-996d-0398faaa6a17"; # The UUID of the unlocked filesystem partition.
 in
 {
   imports = [ (modulesPath + "/installer/scan/not-detected.nix") ];
@@ -71,22 +70,16 @@ in
 
   # Configure the main filesystem.
   aux.system.filesystem = {
-    btrfs = {
     enable = true;
-      devices = {
+    partitions = {
       boot = "/dev/disk/by-uuid/${bootUUID}";
-        btrfs = "/dev/disk/by-uuid/${rootUUID}";
+      luks = "/dev/disk/by-uuid/${luksUUID}";
     };
     swapFile = {
       enable = true;
       size = 16384;
     };
   };
-    luks = {
-      enable = true;
-      uuid = luksUUID;
-    };
-  };
 
   networking = {
     useDHCP = lib.mkDefault true;

hosts/Shura/hardware-configuration.nix

@@ -9,7 +9,6 @@
 let
   bootUUID = "AFCB-D880"; # The UUID of the boot partition.
   luksUUID = "bcf67e34-339e-40b9-8ffd-bec8f7f55248"; # The UUID of the locked LUKS partition.
-  rootUUID = "b801fbea-4cb5-4255-bea9-a2ce77d1a1b7"; # The UUID of the unlocked filesystem partition.
 in
 {
   imports = [ (modulesPath + "/installer/scan/not-detected.nix") ];
@@ -36,22 +35,16 @@ in
 
   # Configure the main filesystem.
   aux.system.filesystem = {
-    btrfs = {
     enable = true;
-      devices = {
+    partitions = {
       boot = "/dev/disk/by-uuid/${bootUUID}";
-        btrfs = "/dev/disk/by-uuid/${rootUUID}";
+      luks = "/dev/disk/by-uuid/${luksUUID}";
     };
     swapFile = {
       enable = true;
       size = 16384;
     };
   };
-    luks = {
-      enable = true;
-      uuid = luksUUID;
-    };
-  };
 
   networking = {
     # Enables DHCP on each ethernet and wireless interface. In case of scripted networking

modules/system/filesystem.nix

@@ -2,22 +2,23 @@
 let
   cfg = config.aux.system.filesystem;
 
-  standardMountOpts = [ "compress=zstd" ];
+  # LUKS partition will decrypt to /dev/mapper/nixos-root
+  decryptPart = "nixos-root";
+  decryptPath = "/dev/mapper/${decryptPart}";
 in
 {
   options = {
     aux.system.filesystem = {
-      btrfs = {
       enable = lib.mkEnableOption (lib.mdDoc "Enables standard BTRFS subvolumes and parameters.");
-        devices = {
+      partitions = {
         boot = lib.mkOption {
           type = lib.types.str;
           description = "The ID of your boot partition. Use /dev/disk/by-uuid for best results.";
           default = "";
         };
-          btrfs = lib.mkOption {
+        luks = lib.mkOption {
           type = lib.types.str;
-            description = "The ID of your BTRFS partition. Use /dev/disk/by-uuid for best results.";
+          description = "The ID of your LUKS partition. Use /dev/disk/by-uuid for best results.";
           default = "";
         };
       };
@@ -30,46 +31,30 @@ in
         };
       };
     };
-      luks = {
-        enable = lib.mkEnableOption (
-          lib.mkDoc "Enables an encrypted LUKS container for the BTRFS partition."
-        );
-        uuid = lib.mkOption {
-          type = lib.types.str;
-          description = "The UUID of the encrypted LUKS volume.";
-        };
-      };
-    };
   };
 
-  config = lib.mkIf cfg.btrfs.enable {
+  config = lib.mkIf cfg.enable {
 
     # Check for blank parameters
     assertions = [
       {
-        assertion = cfg.btrfs.devices.btrfs != "";
-        message = "Please specify the BTRFS partition UUID to use as the filesystem.";
+        assertion = cfg.partitions.luks != "";
+        message = "Please specify a LUKS partition to use as the root filesystem.";
       }
       {
-        assertion = cfg.btrfs.devices.boot != "";
-        message = "Please specify the boot partition UUID.";
+        assertion = cfg.partitions.boot != "";
+        message = "Please specify your boot partition.";
       }
-      (lib.mkIf cfg.luks.enable {
-        assertion = cfg.luks.uuid != "";
-        message = "Please enter a valid UUID for the encrypted LUKS volume.";
-      })
     ];
-    boot.initrd.luks.devices = lib.mkIf cfg.luks.enable {
-      "luks-${cfg.luks.uuid}" = {
-        device = "/dev/disk/by-uuid/${cfg.luks.uuid}";
+    boot.initrd.luks.devices.${decryptPart} = {
+      device = cfg.partitions.luks;
       # Enable TPM auto-unlocking if configured
       crypttabExtraOpts = lib.mkIf config.aux.system.bootloader.tpm2.enable [ "tpm2-device=auto" ];
     };
-    };
     fileSystems =
       {
         "/" = {
-          device = cfg.btrfs.devices.btrfs;
+          device = decryptPath;
           fsType = "btrfs";
           options = [
             "subvol=@"
@@ -77,11 +62,11 @@ in
           ];
         };
         "/boot" = {
-          device = cfg.btrfs.devices.boot;
+          device = cfg.partitions.boot;
           fsType = "vfat";
         };
         "/home" = {
-          device = cfg.btrfs.devices.btrfs;
+          device = decryptPath;
           fsType = "btrfs";
           options = [
             "subvol=@home"
@@ -89,7 +74,7 @@ in
           ];
         };
         "/var/log" = {
-          device = cfg.btrfs.devices.btrfs;
+          device = decryptPath;
           fsType = "btrfs";
           options = [
             "subvol=@log"
@@ -97,7 +82,7 @@ in
           ];
         };
         "/nix" = {
-          device = cfg.btrfs.devices.btrfs;
+          device = decryptPath;
           fsType = "btrfs";
           options = [
             "subvol=@nix"
@@ -106,9 +91,9 @@ in
           ];
         };
       }
-      // lib.optionalAttrs cfg.btrfs.swapFile.enable {
+      // lib.optionalAttrs cfg.swapFile.enable {
         "/swap" = {
-          device = cfg.btrfs.devices.btrfs;
+          device = decryptPath;
           fsType = "btrfs";
           options = [
             "subvol=@swap"
@@ -117,10 +102,10 @@ in
         };
       };
 
-    swapDevices = lib.mkIf cfg.btrfs.swapFile.enable [
+    swapDevices = lib.mkIf cfg.swapFile.enable [
       {
         device = "/swap/swapfile";
-        size = cfg.btrfs.swapFile.size;
+        size = cfg.swapFile.size;
       }
     ];
   };

modules/ui/desktops/gnome.nix

@@ -65,26 +65,26 @@ in
           gnomeExtensions.extension-list
           gedit # text editor
         ])
-        ++ (with pkgs.gnome; [
+        ++ (with pkgs; [
           cheese # webcam tool
-          gnome-music
+          gnome.gnome-music
           gnome-calendar
           epiphany # web browser
           geary # email reader
           evince # document viewer
-          gnome-characters
-          gnome-software
+          gnome.gnome-characters
+          gnome.gnome-software
           totem # video player
-          tali # poker game
-          iagno # go game
-          hitori # sudoku game
-          atomix # puzzle game
+          gnome.tali # poker game
+          gnome.iagno # go game
+          gnome.hitori # sudoku game
+          gnome.atomix # puzzle game
         ]);
 
       # Install additional packages
       systemPackages = with pkgs; [
         # Gnome tweak tools
-        gnome.gnome-tweaks
+        gnome-tweaks
         # Gnome extensions
         gnomeExtensions.alphabetical-app-grid
         gnomeExtensions.another-window-session-manager
@@ -93,7 +93,7 @@ in
         gnomeExtensions.forge
         gnomeExtensions.random-wallpaper
         # Themeing
-        gnome.gnome-themes-extra
+        gnome-themes-extra
         papirus-icon-theme
         qogir-icon-theme
       ];

modules/ui/flatpak.nix

@@ -71,7 +71,7 @@ with lib;
         aggregatedIcons = pkgs.buildEnv {
           name = "system-icons";
           paths = with pkgs; [
-            (lib.mkIf config.aux.system.ui.desktops.gnome.enable gnome.gnome-themes-extra)
+            (lib.mkIf config.aux.system.ui.desktops.gnome.enable gnome-themes-extra)
             (lib.mkIf config.aux.system.ui.desktops.kde.enable kdePackages.breeze-icons)
             papirus-icon-theme
             qogir-icon-theme