hosts/Dimaga/default.nix

@@ -1,115 +0,0 @@
-{
-  config,
-  lib,
-  pkgs,
-  ...
-}:
-
-let
-  # Do not change this value! This tracks when NixOS was installed on your system.
-  stateVersion = "24.11";
-in
-{
-  imports = [ ./hardware-configuration.nix ];
-
-  system.stateVersion = stateVersion;
-
-  ###*** Configure your system below this line. ***###
-  # Set your time zone.
-  #   To see all available timezones, run `timedatectl list-timezones`.
-  time.timeZone = "America/New_York";
-
-  # Configure the system.
-  aux.system = {
-    # Enable to allow unfree (e.g. closed source) packages.
-    # Some settings may override this (e.g. enabling Nvidia GPU support).
-    # https://nixos.org/manual/nixpkgs/stable/#sec-allow-unfree
-    allowUnfree = true;
-
-    apps = {
-      development.enable = true;
-      media.enable = true;
-      office.enable = true;
-      recording.enable = true;
-      social.enable = true;
-      writing.enable = true;
-    };
-
-    # Enable Secure Boot support.
-    bootloader = {
-      enable = true;
-      secureboot.enable = true;
-      tpm2.enable = true;
-    };
-
-    # Use Disko to partition and format disks
-    disko = {
-      enable = true;
-      primaryDiskID = "";
-      swapFile = { 
-        enable = true;
-        size = "16G";
-      };
-    };
-
-    # Change the default text editor. Options are "emacs", "nano", or "vim".
-    editor = "nano";
-
-    # Enable GPU support.
-    gpu = {
-      intel.enable = true;
-      nvidia = {
-        enable = false;
-        hybrid = {
-          enable = false;
-          busIDs.nvidia = "";
-          busIDs.intel = "";
-        };
-      };
-    };
-
-    # Change how long old generations are kept for.
-    retentionPeriod = "14d";
-
-    services = {
-      autoUpgrade = {
-        enable = true;
-        configDir = config.secrets.nixConfigFolder;
-        onCalendar = "daily";
-        user = config.users.users.aires.name;
-      };
-      virtualization.enable = true;
-    };
-
-    ui = {
-      desktops.gnome = {
-        enable = true;
-        tripleBuffering.enable = true;
-      };
-      flatpak = {
-        # Enable Flatpak support.
-        enable = true;
-
-        # Define Flatpak packages to install.
-        packages = [
-          "com.github.tchx84.Flatseal"
-          "com.github.wwmm.easyeffects"
-          "md.obsidian.Obsidian"
-          "org.keepassxc.KeePassXC"
-          "org.mozilla.firefox"
-        ];
-      };
-    };
-
-    users.aires = {
-      enable = true;
-      services = {
-        syncthing = {
-          enable = true;
-          autostart = true;
-          enableTray = false;
-        };
-      };
-    };
-  };
-}

hosts/Dimaga/hardware-configuration.nix

@@ -1 +0,0 @@
-builtins.abort "Need to generate hardware-configuration.nix for Dimaga"

hosts/Haven/default.nix

@@ -40,16 +40,6 @@ in
       tpm2.enable = true;
     };
 
-    # Use Disko to partition and format disks
-    disko = {
-      enable = false;
-      primaryDiskID = "nvme-eui.002538da11443b4d";
-      swapFile = { 
-        enable = true;
-        size = "16G";
-      };
-    };
-
     # Change the default text editor. Options are "emacs", "nano", or "vim".
     editor = "nano";
 

hosts/Shura/default.nix

@@ -53,16 +53,6 @@ in
       tpm2.enable = true;
     };
 
-    # Partition disks using Disko
-    disko = {
-      enable = false;
-      primaryDiskID = "nvme-eui.ace42e0025b66c912ee4ac0000000001";
-      swapFile = { 
-        enable = true;
-        size = "16G";
-      };
-    };
-
     # Change the default text editor. Options are "emacs", "nano", or "vim".
     editor = "nano";
 

hosts/Shura/disko.nix

@@ -1,6 +1,6 @@
 { lib, config, ... }:
 let
-  cfg = config.aux.system.disko;
+  cfg = config.disko;
 
   standardMountOpts = [
     "compress=zstd"
@@ -9,12 +9,20 @@ let
 in
 {
   options = {
-    aux.system.disko = {
+    disko = {
       enable = lib.mkEnableOption (lib.mdDoc "Enables Disko for disk & partition management.");
-      primaryDiskID = lib.mkOption {
+      primaryDisk = lib.mkOption {
-        type = lib.types.str;
+        type = lib.types.attrs;
-        description = "The ID of the disk to manage using Disko. If possible, use the World Wide Name (WWN), e.g `/dev/disk/by-id/nvme-eui.*`";
+        description = "The disk to format using Disko.";
-        default = "";
+        default = {
+          name = "nvme0n1";
+          id = "";
+        };
+      };
+      enableTPM = lib.mkOption {
+        type = lib.types.bool;
+        description = "Enables TPM2 support.";
+        default = true;
       };
       swapFile = {
         enable = lib.mkEnableOption (lib.mdDoc "Enables the creation of swap files.");
@@ -28,15 +36,8 @@ in
   };
 
   config = lib.mkIf cfg.enable {
-    # Check for blank values
-      assertions = [
-        {
-          assertion = (cfg.primaryDiskID != "");
-          message = "aux.system.disko.primaryDiskID is not set. Please enter a valid disk ID.";
-        }
-      ];
     # Disk management
-    disko.enableConfig = true;
+    disko.enableConfig = false;
     disko.devices = {
       disk = {
         main = {
@@ -65,7 +66,7 @@ in
                   name = "cryptroot";
                   settings = {
                     allowDiscards = true;
-                    crypttabExtraOpts = lib.mkIf config.aux.system.bootloader.tpm2.enable [ "tpm2-device=auto" ];
+                    crypttabExtraOpts = lib.mkIf cfg.enableTPM [ "tpm2-device=auto" ];
                   };
                   content = {
                     type = "btrfs";