raspberry-pi/4: add led disable overlay

This commit is contained in:
Felix Buehler 2023-11-14 20:48:59 +01:00
parent 9d09a7452c
commit a742fe3a04
2 changed files with 117 additions and 0 deletions

View file

@ -8,6 +8,7 @@
./digi-amp-plus.nix
./dwc2.nix
./i2c.nix
./leds.nix
./modesetting.nix
./pkgs-overlays.nix
./poe-hat.nix

116
raspberry-pi/4/leds.nix Normal file
View file

@ -0,0 +1,116 @@
{ config, lib, ... }:
let
cfg = config.hardware.raspberry-pi."4".leds;
in
{
options.hardware = {
raspberry-pi."4".leds = {
disable-eth = lib.mkEnableOption ''
disable ethernet LEDs.
'';
disable-act = lib.mkEnableOption ''
disable activity LED.
'';
disable-pwr = lib.mkEnableOption ''
disable power LED.
'';
};
};
# Adapted from: https://gist.github.com/SFrijters/206d2c09656affb04284f076c75a1969
config = lib.mkMerge [
(lib.mkIf cfg.disable-eth {
hardware.deviceTree = {
overlays = [
# https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README
# eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"),
# green on Pi4 (default "0").
# The legal values are:
#
# Pi4
#
# 0=Speed/Activity 1=Speed
# 2=Flash activity 3=FDX
# 4=Off 5=On
# 6=Alt 7=Speed/Flash
# 8=Link 9=Activity
#
# Debugging:
# $ hexdump /proc/device-tree/scb/ethernet@7d580000/mdio@e14/ethernet-phy@1/led-modes
{
name = "disable-eth-leds";
filter = "*rpi-4-b*";
dtsText = ''
/dts-v1/;
/plugin/;
/{
compatible = "raspberrypi,4-model-b";
fragment@0 {
target = <&phy1>;
__overlay__ {
led-modes = <0x04 0x04>;
};
};
};
'';
}
];
};
})
(lib.mkIf cfg.disable-act {
hardware.deviceTree = {
overlays = [
# Debugging:
# $ hexdump /proc/device-tree/leds/led-act/gpios
# $ cat /proc/device-tree/leds/led-act/linux,default-trigger
{
name = "disable-act-led";
filter = "*rpi-4-b*";
dtsText = ''
/dts-v1/;
/plugin/;
/{
compatible = "raspberrypi,4-model-b";
fragment@0 {
target = <&act_led>;
__overlay__ {
gpios = <&gpio 42 0>; /* first two values copied from bcm2711-rpi-4-b.dts */
linux,default-trigger = "none";
};
};
};
'';
}
];
};
})
(lib.mkIf cfg.disable-pwr {
hardware.deviceTree = {
overlays = [
# Debugging:
# $ hexdump /proc/device-tree/leds/led-pwr/gpios
# $ cat /proc/device-tree/leds/led-pwr/linux,default-trigger
{
name = "disable-pwr-led";
filter = "*rpi-4-b*";
dtsText = ''
/dts-v1/;
/plugin/;
/{
compatible = "raspberrypi,4-model-b";
fragment@0 {
target = <&pwr_led>;
__overlay__ {
gpios = <&expgpio 2 0>; /* first two values copied from bcm2711-rpi-4-b.dts */
linux,default-trigger = "default-on";
};
};
};
'';
}
];
};
})
];
}