From 53f978f270d660103fe96ac9d8d84655f82f8b2e Mon Sep 17 00:00:00 2001 From: jopejoe1 Date: Wed, 17 Apr 2024 19:34:02 +0200 Subject: [PATCH] link offical wiki page instead of unoffical --- friendlyarm/nanopc-t4/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/friendlyarm/nanopc-t4/README.md b/friendlyarm/nanopc-t4/README.md index 30ccf04..23d0462 100644 --- a/friendlyarm/nanopc-t4/README.md +++ b/friendlyarm/nanopc-t4/README.md @@ -4,7 +4,7 @@ This document on how I configure [NixOS](https://nixos.org/) on [NanoPC-T4](http # Installation -To install NixOS on you can follow the [official instructions](https://nixos.wiki/wiki/NixOS_on_ARM/NanoPC-T4) and use the [pre-built images](https://github.com/tmountain/arch-nanopct4/tree/main/images/) from @tmountain. You can also build the U-Boot image yourself from `nixpkgs` based on changes added in [#111034](https://github.com/NixOS/nixpkgs/pull/111034). +To install NixOS on you can follow the [official instructions](https://wiki.nixos.org/wiki/NixOS_on_ARM/NanoPC-T4) and use the [pre-built images](https://github.com/tmountain/arch-nanopct4/tree/main/images/) from @tmountain. You can also build the U-Boot image yourself from `nixpkgs` based on changes added in [#111034](https://github.com/NixOS/nixpkgs/pull/111034). ## NixOS on NVMe with ZFS @@ -62,7 +62,7 @@ A reader using `CP2102` chip did not work but `FT232RL` works fine: You can use `minicom` or `picocom` to connect: ``` -sudo minicom -b 1500000 -D /dev/ttyUSB0 +sudo minicom -b 1500000 -D /dev/ttyUSB0 sudo picocom -b 1500000 /dev/ttyUSB0 ``` But you'll need to disable flow control with `Ctrl-A x`.