nixos-hardware/nxp/README.md
Ivan Nikolaenko 826a2714d7
nxp: imx8: Fix wrong paths to imx-uboot.nix file
In addition, adjust code formatting and improve documentation

Signed-off-by: Ivan Nikolaenko <ivan.nikolaenko@unikie.com>
2023-03-07 13:54:38 +02:00

21 lines
1 KiB
Markdown

# NXP i.MX8 SOC family support
## 1. Supported devices
- [i.MX8QuadMax Multisensory Enablement Kit](https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-8quadmax-multisensory-enablement-kit-mek:MCIMX8QM-CPU) (**imx8qm-mek**) - device-specific U-boot and Linux kernel, nixos configuration example.
- [i.MX8QuadXPlus Multisensory Enablement Kit](https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-8quadxplus-multisensory-enablement-kit-mek:MCIMX8QXP-CPU) (**imx8qxp-mek**) - device-specific U-Boot and Linux kernel.
## 2. How to use
Currently this NXP overlay is used for generating EFI-bootable NixOS images.
I recommend to use [Tow-Boot](https://tow-boot.org/) as a bootloader, but U-Boot from this overlay can also be used.
U-Boot was tested separately from NixOS.
Code snippet example that enables imx8qm configuration:
```
{ nixos-hardware, }: {
system = "aarch64-linux";
modules = [
nixos-hardware.nixosModules.imx8qm-mek
];
}
```